ISB for Alphasense four-electrode B- type sensor

Can provide:

1. Outstanding stability;

2. Ultra-short setting time;

3. Good grounding and shielding method;

4. Low noise potentiostatic circuits provide good ground resolution.

Features:

1. Input voltage: 6.0 ±0.2 VDC (low noise and decoupling)

2. Zero point output (zero point offset): several hundred millivolts;

3. Full range output:<6v< span = "">

4. Connector: 6-pin Molex slot

Note: If the ISB is shipped with the B4 sensor, the zero voltage (in millivolts) and sensitivity (in mV/ppm) will be included on the label. If you swap the sensor and ISB, the offset voltage will change, but the sensitivity will remain the same (± 1%), because the sensitivity depends on the sensor and not the ISB.