-
Infrared Emitting Diode SE3470/5470Model: SE3470/5470
Brand: American Honeywell
Brief introduction of infrared emitting diode SE3470/5470: operating temperature -55 ℃ -125 ℃, output wavelengths of 935 and 880nm, ray angle of 90, output power of 2.00, 3.50, 4.80, 5.40mW. Other product parameters of the same series are compared as follows -
Photoelectric crystal (receiving tube) SD3443Model: SD3443
Brand: American Honeywell
Introduction of photoelectric crystal (receiving tube) SD3443: working temperature -55 ℃ -125 ℃, angular response 90, minimum photocurrent 0.5mA. The package is TO-46. Other product parameters of the same series are compared as follows: model bright current (mA) sensor receiving angle (°) bias SD -
HOA0890 of Slot Photoelectric Optoelectronic TransducerModel: HOA0890
Brand: American Honeywell -
Photoelectric crystal (receiving tube) SD2440Model: SD2440
Brand: American Honeywell
Photoelectric crystal (receiving tube) SD2440 Introduction: 1.5mm metal package infrared photoelectric sensor. The operating temperature is -55 ℃ -125 ℃, the angular response is 48 °, and the minimum photocurrent is 7.0 mA. Other product parameters of the same series are compared as follows: model bright current (mA) sensor -
Infrared Emitting Diode SE3455/5455Model: SE3455/5455
Brand: American Honeywell
Brief introduction of infrared emitting diode SE3455/5455: operating temperature -55 ℃ -125 ℃, output wavelength is 935 nm and 880nm respectively, ray angle is 20, output power is 2.00, 3.50, 4.80, 5.40mW, etc. Other products in the same series -
Barcode Sensor HOA6480Model: HOA6480
Brand: American Honeywell
bar code sensor HOA6480 1. profile: designed for bar code detection instrument designed by the photoelectric bar code encoder. Contains a complete circuit, including the phototransistor driver op amp LPV321. The output is 5V high and low level. 2. features: 0.180inch focal length 0.010i -
Infrared sensor receiver EPM-4001 for blood oxygen analysisModel: EPM-4001
Brand: American MEAS
1. Description: This product is used for quantitative analysis of blood oxygen, EPM-4001 is the detection part of the analysis component. is a silicon planar diffused photodiode, designed for the medical industry. It is characterized by high efficiency and fast response. This product can be paired with ELM4001 and ELM4002 -
Infrared sensor transmitter for blood oxygen analysis ELM-4000Model: ELM-4000
Brand: American MEAS
1. introduction: ELM-4000 series is the emission part of blood oxygen analysis module. Its emission peak wavelength is very suitable for blood oxygen analyzer. The emission light source is GaAlAs in combination with the material of GaAlP. And has an intrinsically safe epoxy lens 2. product features: low cost, 660 -
Reflective Photoelectric Kit HOA1180/2498Model: HOA1180/2498
Brand: American Honeywell
Introduction to Reflective Optoelectronic Kit HOA1180/2498: Provide reflective components based on airtight metal packaging. The interior can be infrared light emitting tube, phototransistor and Darlington tube series according to requirements, which can meet most industrial applications. The device pin soldering temperature shall not exceed 260 ℃. Included metal parts -
Optical Smitt Receiver SD5600/5610Model: SD5600/5610
Brand: American Honeywell
Introduction of photoelectric Schmidt receiver SD5600/5610: operating temperature -40 ℃ -100 ℃, power supply voltage 16.0V, output resistance 10KΩ pull-up, response angle 12. Features: Output logic level action threshold light intensity model Buffer2.5mW/cm2SD -
Infrared Emitting Diodes SE2460/SE2470Model: SE2460/2470
Brand: no brand
1. main features of infrared emitting diode SE2460/SE2470: the operating temperature of infrared emitting diode is -55 ℃ -125 ℃, the output wavelength is 935 nm and 880nm respectively, and the output power of ray angle 18 is 0.27, 0.40, 1.00 and 1.70 -
Infrared emitting diode SE1450/1470(L)Model: SE1450/1470(L)
Brand: no brand
Brief introduction of infrared emitting diode SE1450/1470(L): 2mm metal packaged infrared photoelectric sensor, operating temperature -55 ℃ -125 ℃, output wavelength SE1450 corresponds to 935nm,SE1470 corresponds to 880nm. Ray angle 24 °, output power 0 -
Photoelectric crystal (receiving tube) SDP8405/8406Model: SDP8405/8406
Brand: American Honeywell
Photoelectric crystal (receiving tube) SDP8405/8406 Introduction: Side plastic package infrared photoelectric sensor receiving tube. The operating temperature is -40 ℃ -85 ℃, the angular response is 20, and the minimum photocurrent is 12.0 mA. Other product parameters of the same series are compared as follows: sensor bright -
Photoelectric crystal (receiving tube) SD1440Model: SD1440
Brand: American Honeywell
Photoelectric crystal (receiving tube) SD1440 Introduction: 2mm metal package infrared photoelectric sensor. The operating temperature is -55 ℃ -125 ℃, the angular response is 24 °, and the minimum photocurrent is 3.0 mA. Other product parameters of the same series are compared as follows: model bright current (mA) sensor connection -
Optical Smitt Receiver SDP8600Model: SDP8600
Brand: American Honeywell
Photoelectric Schmitt Receiver SDP8600 Introduction: The output of the photoelectric Schmitt receiver is buffered by a Schmitt trigger circuit to ensure matching with the current digital circuit. The current Max value of the luminous tube that can cause the state change of the receiver is 20mA, and the output stage is NPN triode with grounded emitter and 10K -
Infrared refrigerant leak detector SRL2K7Model: SRL2K7
Brand: American Phoebe Fieldpiece
An infrared refrigerant leak detection SRL2K7 product description: This infrared refrigerant leak detector can help HVAC refrigeration (HVACR) technicians to accurately find the leak point. Infrared induction is a high sensitivity refrigerant leak detection technology, according to the field case study, SRL2K7 is currently on the market sensitive infrared leak detector -
Encoder Sensor HOA0901/HLC2705Model: HOA0901/HLC2705
Brand: American Honeywell
Encoder sensor HOA0901/HLC2705 introduction: The coded detector includes a dual-channel integrated circuit detector and an infrared LED, packaged in a black thermoplastic housing. Such devices are usually used in conjunction with a masking bar or a code wheel to encode the rate and direction of mechanical motion. Special -
Slot type infrared photoelectric sensorModel:
Brand: American Honeywell
Groove infrared photoelectric sensor HOA0890/0880/0872/0301/0306 introduction: working temperature -40 ℃ -70 ℃. Groove infrared photoelectric sensor has pull-up resistor type, collector output type and push-pull type. Output logic sub-buffer and reverse can be selected -
Infrared Emitting Diode SEP8505/8506Model: SEP8505/8506
Brand: American Honeywell
Infrared emitting diode SEP8505/8506 Introduction: Side-emitting plastic package infrared photoelectric sensor. Operating temperature -40 ℃ -85 ℃, output wavelength 935nm, ray angle 50 °, output power of 0.05, 0.33, 0.45mW. Other products of the same series -
Reflective photovoltaic kit HLC1395/HOA0149/1397/1405Model: HLC1395/HOA0149/1397/1405
Brand: American Honeywell
Reflective Optoelectronic Kit HLC1395/HOA0149/1397/1405 Brief Introduction: Provide reflective components based on airtight metal package. Internal infrared light emitting tube, phototransistor and Darlington tube series can be used according to requirements, which can meet most industrial applications. Device pin soldering temperature does not
Shenzhen Jiesheng Xing Electronics Co., Ltd.We offer complete sensor solutions
Hotline:13662266995