1Month10Day13When40Around, Heping South Street, Heping District, Shenyang City, Liaoning Province96Lane23Building No.5A gas explosion occurred in the building, followed by a fire.

2023Year12Month25A fire broke out in a house in Yangzhou, Jiangsu Province on Sunday. It is reported that the owner of the house used a gas tank in the kitchen at that time. As he could not normally ignite the stove, he used a lighter to ignite the stove. Unexpectedly, the gas tank burned and ignited the house. Fortunately, no casualties were caused.

2023Year12Month24In the early morning of the same day, a gas tank of a barbecue shop in Nanning, Guangxi, exploded suddenly, affecting the surrounding area.5The store, fortunately, put out the fire in time, did not cause casualties.

2023Year12Month12On the 15th, a natural gas explosion occurred in a residential house in Puyang, Henan Province, resulting in4Injuries among them.1people were seriously injured.

Alert! Gas accidents have occurred frequently recently. These shocking images are a wake-up call for us.

Gas brings convenience to our lives, but because of its flammable and explosive, once improper operation or negligence, it is easy to cause gas safety accidents and bring a major threat to people's lives and property.

Under normal circumstances, there will be no explosion accident. Generally speaking, a gas explosion fire needs to have three elements at the same time:1Gas leakage.2The leaked gas reaches the explosive concentration.31. Encounter ignition source.

Most of the gas leaks are due to aging, falling off and wearing of pipelines, improper operation of gas valves, aging of cookers, etc. These situations require users to maintain relevant equipment frequently and regularly check.

Gas leakage is usually not easy to detect, after all, the family uses gas places in the kitchen, bathroom, our activities in these places is relatively short, in case of gas leakage when we are not in these places, but in the living room, bedroom and other places can not be detected.

Therefore, it is better to install an alarm or use a detector to be more reliable and safe. After all, the alarm is generally sound and light alarm, and some also have networking functions, at any time to send the situation to the mobile phone. The detector is more convenient for inspection and inspection, and it is convenient to check where the leakage occurs, such as the pipeline interface, hose aging and other positions, and regularly check and prevent problems before they occur.

The core device of the alarm and detector is the sensor used to detect the leakage of liquefied gas. Here to recommend you a sensorTGS2618-D00This sensor is specially developed by Figaro of Japan for the detection of liquefied gas.

TGS2618-D00Very suitable for liquefied gas leak detection, such:

      1、TGS2618-D00Anti-interference ability is very strong, no response to the kitchen cooking wine or gas fume components, to avoid false positives

      2、TGS2618-D00Rapid response to combustible gases (GB 15322.2-2019Right.T90The response time requirement is30within seconds)

      3、TGS2618-D00Repeatability is very good.

      4long-term stability.

In additionTGS2618-D00In the anti-silicon poisoning ability, anti-vibration anti-drop and other aspects of the performance are fully in lineGB 15322.2-2019The requirements can also be met.GB/T34004-2017Standard requirements, very suitable for liquefied gas leak detection.

The following isTGS2618-D00The basic parameters:

Detection range:500-10000ppm

Test object: butane,LPGas

      Circuit voltage:5.0±0.2V  DC

      Heating voltage:5.0±0.2V  DC

      Heater power consumption:280mW

Life Expectancy:>5Year

Please consult for details.