With the rapid development of China's economy, people's living standards have been improved, the demand for livestock is also growing, the production of traditional breeding has not met the current demand, the new breeding method is the only way to improve production, and the incubator is one of the important equipment in modern poultry breeding equipment.

Temperature and humidity are two important factors when incubating eggs in an incubator. Here is an example of egg hatching. When an egg hatches, it is filled with various liquids, including water. During incubation, the egg slowly loses some of its water through the pores of the shell. Eggs lose moisture depending on the external humidity. When the egg loses some water, an air bag will be formed inside the egg. The air bag will determine the quality of the chick's hatching. If the air bag is too small, the chick will suffocate and drown when passing through the eggshell. If the air bag is too large, the hatching volume of the chick will be too small. If the air bag is of the right size, the hatching success rate will reach zui.

The humidity range of the incubator, the humidity at the beginning of the incubation period is50%RHAbout, after three weeks, the humidity is about60-75%RH, after the sale period of zui, the humidity is probably25%RH。

How to increase humidity?

The best way to increase the humidity in the incubator is to put more water in the incubator. If that's not enough, try to keep the incubator closed. Every time the incubator is opened, some of the humid air is expelled and replaced by less humid air. If none of these are sufficient, additional water can be added somewhere in the incubator. This will cause more water to evaporate, thereby greatly increasing the humidity.

How to reduce humidity?

A simple way to reduce the humidity in the incubator is to simply open the vent and remove the water from the incubator. In almost all cases, this is more than enough. If you live in a place with a very humid climate, the outside air may also be too humid. In this case, you can buy a dehumidifier for the room where the incubator is located, or add some dehumidifying items to the incubator itself. Both rice and paper towels can effectively reduce the humidity in the incubator.

For temperature and humidity control, the use of temperature and humidity sensors is necessary, the following recommend a South KoreaSamyoungTemperature and humidity sensorHCPV-20XX-XX。