Optical exposure to any oxygen concentrationmicro amount of oxygenSensorLOX-TRACE-1000-BLX

Model:LOX-TRACE-1000-BLX

Detailed introduction:

Oxygen sensors based on the principle of fluorescence quenching can be used to measure ambient oxygen partial pressure (ppO2) size and has low power, non-consumption sensing principle, temperature and pressure compensation and other characteristics. 

Advantages:

·Can work at any oxygen concentration without damaging the sensor

·Highly selective and sensitive to oxygen

·Long life(More than 5 years), non-expendable technology-No need to store in inert gas environment

·Fast response, low power consumption, high precision

·Easy to use, directly throughRS485 interface to controller

·Factory calibration

·Small, flow-through housing, sealed base

·ComplianceRoHS & REACH

Parameters

·Range0-1000PPM
·Resolution:1PPM
·Use pressure range 260mbar-1260mbar
·High precision:<2%fs< span="">
·Response time:T90<30s< span="">
·Working voltage:8-30VDC average current:<30ma, peak current <60ma.< span = "">
·Output signal:RS485 Modbus RTU<!--30s<--><!--30s<--><!--30s<--><!--2%fs<--><!--2%fs<--><!--2%fs<-->

Application areas:

·Suitable for glove box

·3D Print protection equipment

·Detection of Micro Oxygen at the Outlet of Air-separated Nitrogen

·Detection of Micro Oxygen in Nitrogen Protective Atmosphere in Metallurgical Industry

·Detection of the effect of displacement of oxygen in displacement equipment or pipes

·Detection of Micro Oxygen in Nitrogen Shielding Gas in Reflow Soldering