1. product parameters

1) Heating voltage 4.35VDC ± 0.1VDC (1.85A）

2) Holding voltage 2VDC (0.85A）

3) Pump impedance @700℃** < 6 kΩ

4) Allowed gas temperature -100250℃

5) Airflow rate 010m/s

6) Allowable repetitive acceleration5g

7) Allowable instantaneous acceleration30g

Measure the voltage as close to the sensor as possible, because the wire will produce a voltage drop.

The heating rod can be powered using an equivalent AC or PWM signal.

The constant current source of the pump current circuit can drive a Max 6 kΩ load.

2. product characteristics
1) oxidation range: 2mbar-3bar
2) Zirconia detection element
3) Non-expendable technology
4) No temperature compensation, no reference gas
5) High precision
6) Linear output signal
7) Work with external interface board